Close

Combined Atomic Force Microscope and Volumetric Light Sheet System for Mechanobiology

E. Nelsen, C.M. Hobson, M.E. Kern, J.P. Hsiao, E.T. O’Brien III, T. Watanabe, B.M. Condon, M. Boyce, S. Grinstein, K.M. Hahn, M.R. Falvo, R. Superfine

Preprint posted on 21 October 2019 https://www.biorxiv.org/content/10.1101/812396v2

It takes two to tango: high spatiotemporal resolution imaging together with atomic force microscopy

Selected by Martim Dias Gomes

Categories: biophysics

Background

The advent of Atomic Force Microscopy (AFM) in biology revolutionized the way we understand cells as mechanical-responsive elements. Classically, at the cellular level, the AFM technique is used to probe viscoelastic properties and measure adhesion forces. In the most common AFM setups the AFM head is mounted in an epifluorescence microscope allowing the user to monitor the sample. However, due to the AFM design which applies the forces perpendicular to the image plane, the imaging data capture has poor z-resolution making it difficult to catch subtleties as cellular deformations. In the meanwhile, combining force spectroscopy with fluorescence high-resolution imaging in 3D has proven to be challenging due to the complex optics setup and the extremely low vibrations that the AFM measurements tolerate. This preprint reports a novel approach to tackle this problem: an integrated system that combines a vertical Line Bessel light sheet system (LSFM) with an AFM module.

Technical approach

By using a Line Bessel version of the previously described (Beicker et al., 2018) microscope equipped with a PRISM+ (pathway rotated imaging for sideways microscopy) the authors describe a multimodal approach that allows two-colour, 3D live cell-imaging and consecutive AFM spectroscopy data synchronization. The new LSFM-AFM microscope is a single-objective non-diffractive version which includes a fully-computer controlled light path, composed of several electronic tuneable lenses (ETL) and steering mirrors. This approach allows for high-frame rate image acquisition and remote focusing capabilities while minimizing the working vibration (Figure1)(Nelsen et al., 2019).

+ PRISM principle: A 45°reflecting optical component is brought next to the cell of interest. Upon the approaching of the objective towards the sample the focal plane is subsequent move in the z-direction until intersects the 45°reflecting optical component. There the virtual x-z image is formed.


Figure1: (a) Schematic representation of LSFM-AFM microscope and (b) PRISM with x-z image projection (c) Side-view of fluorescent labelled RAW 264.7 macrophage (green) and cantilever tip coated with IgG (magenta). Adapted from Nelsen et al., 2019. Courtesy of the authors.

Proof of principle

In order to test the different capabilities of the LSFM-AFM microscope, the authors performed successfully several proof of principle experiments such as:

  • Imaging lysosome trafficking under controlled mechanical load (Live cell two-coloured volumetric imaging)
  • Force measurements of macrophage phagocytosis (Live cell two-coloured imaging with AFM force data synchronization)
  • Force measurements of macrophage phagocytosis in 3D (Live cell two-coloured volumetric imaging with AFM force data synchronization) (Figure2)

Figure2: (a) F-actin dynamics during RAW 264.7 macrophage phagocytosis. (b) AFM force measurements synchronized to the frames (red lines delimitate the frames) (c) Maximum projection x-y, dashed lines delimitate the cantilever bead, pseudo-color scale –F-tractin. Adapted from Nelsen et al., 2019. Courtesy of the authors.

Why do I like this Preprint?

A cell is an active 3D element that can sense and react to mechanical stimuli. The ability to capture dynamic phenomena that happen at small scale is essential to understand cellular mechanics. By using this new method, the prospect of observing cells at high spatiotemporal resolution and directly probing their viscoelastic or adhesive properties open immense possibilities for the field of cell biology and biophysics.

 

Questions to the authors

You mention that the primary disadvantage of your system is the loss of light collection efficiency when imaging in x-z. Is there a way you could improve this in future versions?

In your previous version (Beicker et al., 2018), you discussed the existence of multiple stiffness regimes in your indentation experiments which is also described by others. Could you in your new system gain some new insights on that? Can your system be of help in calibrating non-Hertzian models? What is your current opinion on the contribution of the nucleus for the viscoelastic behaviour and indentation response?

What is your next step?

References

Beicker, K., E.T. O’Brien, M.R. Falvo, and R. Superfine. 2018. Vertical Light Sheet Enhanced Side-View Imaging for AFM Cell Mechanics Studies. Sci. Rep. 8:1504. doi:10.1038/s41598-018-19791-3.

Nelsen, E., C.M. Hobson, M.E. Kern, J.P. Hsiao, E.T. O’Brien, T. Watanabe, B.M. Condon, M. Boyce, S. Grinstein, K.M. Hahn, M.R. Falvo, and R. Superfine. 2019. Combined Atomic Force Microscope and Volumetric Light Sheet System for Mechanobiology. bioRxiv. 812396. doi:10.1101/812396.

Tags: afm, light-sheet microscopy, mechanobiology

Posted on: 12 November 2019 , updated on: 28 November 2019

doi: https://doi.org/10.1242/prelights.15137

Read preprint (No Ratings Yet)

Author's response

Chad Hobson shared

Q1. You are correct in that the primary disadvantage of our x-z imaging is light collection. This is fundamentally governed by the size of the prism that we use to create the x-z image. Because the prism is a finite size of comparable order to a cell, we are not able to take full advantage of the NA of our objective lens. A larger prism may remedy some of the loss of light collection, but could also introduce other issues with, for example, positioning of the AFM cantilever. A full description of the light collection when imaging the x-z plane is given in Supplementary Figure 3.

Q2. Our system can indeed improve our understanding of different stiffness regimes within a single AFM force curve. The volumetric and multicolor imaging capabilities allow us to study how different mechanical constituents of the cell respond in three dimensions to external stimuli, and we can further correlate the three-dimensional image data with signatures in the AFM force curves.

Q3. Our system can help inform non-Hertzian contact mechanics models. One specific example is the height-corrected Hertz model as discussed in Dimitriadis et al (https://doi.org/10.1016/S0006-3495(02)75620-8). With our side-view imaging we can directly measure the height of the sample at the indentation site with improved resolution as compared to reconstructed z-stacks.

Q4. We are actively studying the dynamics of nuclear morphology under compression and its correlation with external force. Previous work has shown that nuclei themselves have multiple stiffness regimes (https://doi.org/10.1091/mbc.e16-09-0653), so we are investigating if similar phenomena can be further understood through use of our instrument. Be on the lookout for another preprint soon!

Q5. We have a variety of projects and ideas underway both in regards to using this tool as well as developing new tools. We are continuing to use the AFM-LS system to study the phenomena of phagocytosis as well as the dynamics of nuclear morphology under compression. Furthermore, we are always looking to improve our technique and design new instruments to study the mechanical properties of single cells.

Have your say

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Sign up to customise the site to your preferences and to receive alerts

Register here
Close