Close

Conditional Guide RNAs: Programmable Conditional Regulation of CRISPR/Cas Function in Bacteria via Dynamic RNA Nanotechnology

Mikhail H. Hanewich-Hollatz, Zhewei Chen, Jining Huang, Lisa M. Hochrein, Niles A. Pierce

Posted on: 18 February 2019

Preprint posted on 21 January 2019

Article now published in ACS Central Science at http://dx.doi.org/10.1021/acscentsci.9b00340

gRNAs for Cas9 are engineered such that they only get activated upon specific RNA triggers. This could one day open the door to linking signaling pathways with Cas9 function!

Selected by Pavithran Ravindran

Categories: bioengineering

Background

The ability to build synthetic signaling circuits and modulate natural biological pathways is a goal of modern synthetic biology. Dynamic RNA nanotechnology is a very promising candidate to be able to accomplish this, especially for pathways that recognize RNA for initiation such as RNA interference. A platform that seems ripe for engineering is gRNAs for CRISPR/Cas9. There has already been a lot of interesting work done in this field to expand the uses of gRNAs and Cas9 to different functions other than the typical editing. For instance, work has been done to engineer the Cas9 protein itself such that it causes up-regulation or down-regulation of genes [1] or, more recently, target specific sites of the genome to particular locations in the cell [2]. gRNAs also provide a flexible platform for such engineering as researchers have introduced protein binding RNA motifs (MS2, PP7, etc.) into gRNAs to recruit protein effectors that can regulate genes of interest [3]. However, work still needs to be done to be able to spatio-temporally restrict these activities. The authors of this preprint set out to engineer conditional gRNAs that only perform their given function upon binding or release from particular RNA trigger sequences.

 

Key Findings

The authors set out to create conditional gRNAs (cgRNAs) that only interface with Cas9 upon binding to or unbinding from a particular RNA trigger sequence. By looking at the structure of a typical gRNA, the authors realized that the Cas9 handle sequence as well as the S. pyrogenes terminator sequence could be engineered to bind/unbind RNA trigger sequences to allow for interfacing with Cas9 and thus various effector functions described above (figure 1). To test the cgRNAs that they developed, the authors utilized E. coli expressing a reporter fluorescent protein, and catalytically inactive Cas9 (dCas9) that silences expression of the fluorophore. Therefore, when the cgRNA is ON, then the dCas9 would bind to the gRNA and the reporter gene, resulting in low fluorophore expression – whereas when the cgRNA is OFF then the fluorophore is not silenced. As controls to see what ON and OFF could look like, the authors introduced non-engineered gRNAs (for ON function) and modified gRNAs without the target-binding domain (for OFF function).

 

Figure 1: Schematic of Cas9 gRNA. gRNAs contain three regions (targeting binding domain, Cas9 handle and S. pyogenes terminator), all of which can be engineered such that the gRNA is conditional on a particular RNA trigger. Taken from Figure 1 of preprint.

 

As a first pass at building cgRNAs, the authors decided to build one that operates in an ON to OFF logic fashion; thus, when the RNA trigger is introduced, the trigger binds to the cgRNA and inactivates it by preventing it from interfacing with dCas9 and thereby results in increased mRFP expression. The authors first tried to introduce a sequence into the terminator sequence of the gRNA that binds to a specific RNA trigger sequence. Binding would linearize this portion of the cgRNA, effectively turning it off . Upon adding the RNA trigger to the cgRNAs, it was very clear that mRFP expression was much higher compared to the case where the cgRNAs were in their ON conformation. However, the authors very quickly realized that the ON state of this cgRNA was not perfect as mRFP expression was higher than what was seen in the standard gRNA case, implying that the Cas9 was not as efficient at binding this engineered gRNA. Therefore, the authors tried to engineer the Cas9 handle and the terminator simultaneously. With this system the authors utilized sfGFP as their readout. The authors found that the ON conformation was very close to that of the standard non-engineered gRNA but this also resulted in a less optimal OFF conformation where, after the trigger was added, the cgRNA still seems to have some silencing ability. The beauty of this particular system is that, since the engineering occurred only in the constant regions of the gRNA and not the targeting sequence portion, this conditional activation of the gRNAs can be done independent of what gene the gRNA was meant to target.

The authors then tried to create a cgRNA that goes from an OFF state to an ON one. To achieve this, they added an extra sequence on the 5’ end of the gRNA that wraps around and covers up the targeting sequence. When the trigger is introduced, the trigger RNA binds to the part of the cgRNA covering the targeting sequence, effectively revealing the targeting sequence and making the cgRNA functional. This ON cgRNA was then shown to interface with dCas9 to silence mRFP expression (Figure 2C).

Figure 2: cgRNAs can compute logic functions. (a) Terminator switch can be used to go from an ON state to an OFF state. gRNA was engineered in the terminator sequence such that upon binding to the RNA trigger, the gRNA undergoes a conformational change such that it cannot interface with Cas9. Authors found that the change from ON to OFF is not perfect as the ON state still has some mRFP expression. (b) Splinted switch cgRNA that also goes from ON to OFF state where both the Cas9 handle and the terminator sequence were engineered. Authors found that the ON state is much closer to a non-engineered gRNA but the OFF state does not have a huge change in sfGFP expression. (c) By hiding the target sequence of the gRNA that is revealed upon RNA trigger introduction, the authors were able to create an OFF to ON cgRNA. Figures taken from figures 2,3 and 4 of preprint.

 

Why I chose this preprint

CRISPR/Cas9 has a very impressive suite of effector functions not limited to the original editing function that was first conceptualized. However, it is tough to limit these functions to particular cell types or during a particular phase of, say, development. This work begins to flirt with this level of control as they show that the cgRNAs can be modulated with the introduction of certain trigger RNAs. This opens the door to linking gRNA/Cas9 effects to signaling pathways in cells such that one could imagine activating Cas9 only in certain tissues within the body or after certain RNAs are expressed during development. This preprint was overall a fun and interesting read with figures that clearly show the results of the experiments.

 

Questions for the authors

Does changing gRNA structure impair double strand cutting ability of Cas9?

When creating your cgRNAs for ON to OFF, you altered the terminator sequence or the terminator and the Cas9 handle. Did you try the Cas9 handle alone and, if so, how did that work?

The utilization of NUPACK to find pairs of cgRNAs and trigger RNAs was used in this study. Can NUPACK or some other program be used to find trigger RNAs that are downstream/upstream of pathways such as Toll-like receptor (TLR), Rig-1 or RNA interference such that the cgRNAs can be activated with particular viral RNAs, mRNAs of signaling pathway targets, etc?

 

References

[1] Qi LS, Larson MH, Gilbert LA, et al. Repurposing CRISPR as an RNA-guided platform for sequence-specific control of gene expression. Cell. 2013;152(5):1173-83. PMID: 23452860.

[2] Wang H, Xu X, Nguyen CM, et al. CRISPR-Mediated Programmable 3D Genome Positioning and Nuclear Organization. Cell. 2018;175(5):1405-1417.e14. PMID: 30318144.

[3] Zalatan JG, Lee ME, Almeida R, et al. Engineering complex synthetic transcriptional programs with CRISPR RNA scaffolds. Cell. 2015;160(1-2):339-50. PMID: 25533786.

 

Tags: bioengineering, cas9, rna nanotechnology

doi: https://doi.org/10.1242/prelights.8500

Read preprint (No Ratings Yet)

Author's response

"The entire author team" shared

  1. Does changing gRNA structure impair double stranded cutting ability of Cas9?

We haven’t tested the effects of the cgRNA modifications on the cutting ability of Cas9 in E. coli (here, we validated the cgRNAs using silencing dCas9). Based on our experiences so far, we would expect that most modifications introduced into the cgRNAs to facilitate conditional regulation impair Cas9 cutting ability to some degree.

  1. When creating your cgRNAs for ON to OFF, you altered the terminator sequence or the terminator and the Cas9 handle. Did you try the Cas9 handle alone and, if so, how did that work?

Yes, we tested a candidate cgRNA mechanism with an extended loop in the dCas9 handle, but unfortunately, expression of the cognate RNA trigger complementary to the extended loop did not inactivate the cgRNA in our preliminary studies, so we set aside that mechanism.

  1. The utilization of NUPACK to find pairs of cgRNAs and trigger RNAs was used in this study. Can NUPACK or some other program be used to find trigger RNAs that are downstream/upstream of pathways such as TLR or Rig1 such that the cgRNAs can be activated with particular viral RNAs, mRNAs of signaling pathway targets, etc?

Yes, NUPACK can constrain the RNA trigger sequence to be a subsequence of an endogenous RNA such as an mRNA (using a window constraint). However, the physical model underlying NUPACK is not as accurate for (long) mRNAs as it is for (short) small conditional RNAs, presumably due to the increased significance of pseudoknots and long-range tertiary interactions (which are not included in the model). As a result, in previous work engineering small conditional RNAs to detect a subsequence of a full-length mRNA, we found that NUPACK designs often functioned well experimentally using a short RNA trigger as the input but then often failed once that same trigger sequence was embedded in a full-length mRNA. To address this accessibility issue, we developed the RNAhyb assay (Hochrein et al., ACS Synth Biol, 2018) to efficiently measure mRNA accessibility as a preprocessing step prior to sequence design, enabling us to constrain NUPACK to select an RNA trigger sequence from amongst the experimentally accessible subsequences of the mRNA.

Have your say

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Sign up to customise the site to your preferences and to receive alerts

Register here

Also in the bioengineering category:

Engineered Nanotopographies Induce Transient Openings in the Nuclear Membrane

Einollah Sarikhani, Vrund Patel, Zhi Li, et al.

Selected by 23 September 2024

Sristilekha Nath

Bioengineering

Scalable and efficient generation of mouse primordial germ cell-like cells

Xinbao Ding, Liangdao Li, Jingyi Gao, et al.

Selected by 05 March 2024

Carly Guiltinan

Cell Biology

Generalized Biomolecular Modeling and Design with RoseTTAFold All-Atom

Rohith Krishna, Jue Wang, Woody Ahern, et al.

Selected by 24 January 2024

Saanjbati Adhikari

Bioengineering
Close